36" Bullwhip Throttle Control Cable 8hp+ Gas Air Compressors W/ Unloader Connection

36" Large body Bullwhip Throttle Control Cable for Gas Air Compressors With 1/4" Compression Side Unloader Port– Fits Engines 8 HP and Above

Made in USA

This 36-inch Large body throttle control cable, often referred to as a Bullwhip, is manufactured by Conrader Valves and proudly made in the USA. Designed specifically for gas-powered air compressors with engines 8 horsepower or larger, this valve helps regulate the engine's throttle when paired with a pilot or unloader valve.

Featuring 1/8" male NPT threads, this valve easily connects to your compressor’s unloader or pilot valve system for smooth and consistent operation. Whether you’re repairing or building your compressor setup, this valve delivers top-notch performance and reliability.

This is the standard TLCI large style Bullwhip With 1/4" compression side unloader port. The standard style Bullwhip has a slight z bend at the end of the cable which latches into a standard carburator lever. If you need another style of cable end see our other throttle control cables.

Specifications:

• Cable Length: 36" inches

• Valve Dimensions: The actual valve body demensions are 3.75" Long including threads x 1" in diameter at the wides point.

• Inlet Air Connection Thread Type: 1/8" Male NPT ( Note: 1/8" NPT measure approximately 3/8" in diameter)

• Side Unloader Port Connection: 1/4" Compression ( Note: 1/4" Compression accepts tubing that is 1/4" OD with a standard compression fitting)

• Body Style: Large body Bullwhip valve designed for 8hp and Larger engines. 

• Engine Compatibility: For use with Honda gas engines 8 HP and above. Along with other brands using the same style carburetor controls and mounting.

• Application: Controls throttle speed on gas-powered air compressors when used in conjunction with a pilot or unloader valve as well as offers a unloader connection for compressors equipped with an unloader system.

• Made in: United States